NanoCore12™

An Entire Family of 9S12 DIP Microcontroller Modules!

School Board

• convenient platform for programming and experimenting with NanoCore12 MCU modules

• solderless breadboard section for easy assembly and disassembly of interface circuits

• includes power distribution strips, for easier circuit construction

• 9-pin D-sub socket for serial interface to personal computer

• dual-voltage regulator configuration to permit user-selectable 3.3V and 5V operation

• low-dropout, low-power regulator, with thermal shutdown and reverse-polarity protection

• connection clips for optional 9V battery operation • reset button • two LEDs for user

• socket strips, for easy and safe removal and insertion of NanoCore12 modules

• accommodates all sizes of NanoCore12 modules

• each MCU signal brought out to two connection points adjacent to breadboard via dual 68-pin receptacles

• 3-pin CAN connector for use with 40-pin MCU Module (NC12MAX) • supplied with rubber feet (nylon standoffs optional)

• same mounting hole locations as Parallax Board of Education®, for easy use with BOE Bot and similar robot platforms.

• requires 6 to 15VDC input (minimum 40 mA) • MCU module not included (order separately)

• Order Code:  NC12SB  • Price:  $60

® BASICStamp and Board of Education are registered trademarks of Parallax Inc.

NanoCore12C32

• the 24-pin drop-in Stamp replacement

• 8 10-bit analog inputs or eight digital

  I/O lines (Port AD)

• 8 digital I/O port lines (Port T)

• up to 5 PWM timer channels (PT0 - PT4)

• up to 8 Input Capture/Output Compare pins

  (Port T)

• 32K program memory + 2K RAM

• Price:  $45 each (under $34 in 100+ quantity)

• Order Code:  NC12C32

Accessories:

Docking Module

• convenient platform for programming and experimenting with NanoCore12 MCU modules

• 9-pin D-sub socket for serial interface to a personal computer

• dual-voltage regulator configuration to permit user-selectable 3.3V and 5V operation

• low-dropout, low-power regulator, with thermal shutdown and reverse-polarity protection

• reset button • two LEDs and two pushbuttons for user

• 40-pin DIP socket accommodates all sizes of NanoCore12 modules

• snappable prototyping area for solderng simple interface circuits

• accommodation for 40-pin I/O access connectors (user-installed option)

• 3-pin CAN connector for use with 40-pin MCU Module (NC12MAX)

• supplied with rubber feet • requires 6 to 15VDC input (minimum 40 mA)

• MCU module not included (order separately)

• Order Code:  9S12CDM  • Price:  $20

NanoCore12DXC32

• the 32-pin Stamp-superset

• 8 extra pins overhang the end of the

  standard Stamp socket

• 8 10-bit analog inputs or 8 digital I/O

  lines (Port AD)

• 16 digital I/O port lines (Ports T, M, and E)

• up to 5 PWM timer channels (PT0 - PT4)

• up to eight Input Capture/Output Compare

  pins (Port T)

• 32K program memory + 2K RAM

• Price:  $49 each (under $37 in 100+ quantity)

• Order Code:  NC12DXC32

NanoCore12MAXC32

• the 40-pin ultimate Stamp-stomper

• 16 extra pins overhang the end of the

  standard Stamp socket

• 8 10-bit analog inputs or 8 digital

  I/O lines (Port AD)

• 23 digital I/O port lines (Ports E, M, and T)

• up to 6 PWM timer channels (PT0 - PT4, PP5)

• up to eight Input Capture/Output Compare

  pins (Port T)

• controller area network (CAN 2.0) (on-board

  transceiver circuit)

• 32K program memory + 2K RAM

• Price:  $60 each ($45 in 100+ quantity)

• Order Code:  NC12MAXC32

NanoCore12MAXC128

• the 40-pin ultimate Stamp-stomper maxed out!

• 16 extra pins overhang the end of the

  standard Stamp socket

• 8 10-bit analog inputs or 8 digital

  I/O lines (Port AD)

• 23 digital I/O port lines (Ports E, M, and T)

• up to 6 PWM timer channels (PT0 - PT4, PP5)

• up to eight Input Capture/Output Compare

  pins (Port T)

• controller area network (CAN 2.0) (on-board

  transceiver circuit)

• 128K program memory + 4K RAM

• Price:  $85 each (under $64 in 100+ quantity)

• Order Code:  NC12MAXC128

Servo/Sensor/Motor Interface Module

This product was designed for mechatronics and robotics applications with

NanoCore12DXC32 (i.e. the 32-pin module).  It has the following features:

• dual H-Bridge drivers (4 Amps per channel) to drive two DC motors or

  one bipolar stepper motor

• connectors for 6 hobby R/C servo motors

• connectors for 2 sonar rangefinders (SRF04)

• connectors for 4 IR distance-measuring sensors (GP2D120)

• audio transducer • electret microphone • battery voltage monitor circuit

• solderless breadboard • 500 mA voltage regulator (3V/5V selectable)

• socket for 32-pin NanoCore12DXC32 module (not comptible with other

  Module sizes) • mounting holes compatible with most robot bases

• Order Code:  NC12DXSSMI  • Price: $90

DC Switching Power Supply (International)

• Input range:  90 to 264VAC @ 47 to 63 Hz

• Output:  9VDC (max load:  560mA)

• supplied with interchangeable power plugs for Europe, UK, Australia, and North America

• CE and UL approved

• Order Code:  DC9VSI-INT

• Price:  $27

DC Power Supply (North American style)

- 120VAC to 9VDC@300mA

- UL approved

• Order Code:  DC9V300

• Price:  $6

Serial Cable

• 9-pin female D-sub to 9-pin male D-sub

• 3-ft. long

• Order Code:  CX09B06

• Price: $5

Breadboard Serial Cable

- plugs into solderless breadboard alongside NanoCore12 module

- 9-pin female D-sub to

  3-pin male pins

- 3 feet (1m) long

Price:  $7.50

Order Code:  SC9SB36

NanoCore12 Kit 1 Bundles

This is our standard bundle, available for each of the four flavours of NanoCore12 modules.  It includes:

• a NanoCore12 module (24-pin, 32-pin, or 40-pin)

• Docking Module

• a standard 9-pin serial cable

• a 9VDC power supply

• CD with software, manual, data sheets, and examples.

#NC12C32KIT1             $75

#NC12DXC32KIT1        $80

#NC12MAXC32KIT1      $95

#NC12MAXC128KIT1  $121

NanoCore12 Kit 2 Bundles

This is our School Board bundle, available for each of the four flavours of NanoCore12 modules.  It includes:

• a NanoCore12 module (24-pin, 32-pin, or 40-pin)

• School Board

• a standard 9-pin serial cable

• a 9VDC power supply

• CD with software, manual, data sheets, and examples.

#NC12C32KIT2            $108

#NC12DXC32KIT2        $121

#NC12MAXC32KIT2      $125

#NC12MAXC128KIT2    $152

Bundles:

NEW!  NanoCore12DXC32SQ QuickStart Package

This cost-effective package includes only the most essential items to get you up and running fast:

• a new low-cost NanoCore12DXC32SQ* module

• a breadboard-compatible serial cable

• a breadboard-compatible power cable

You supply the breadboard and power source.  Download software, manual, data sheets, and examples from the website.  Note only the 32-pin version is offered like this.

#NC12DXC32SQQP Only $59.

*The “SQ” suffix indicates the module has square pins.